ВНИМАНИЕ!!!!


Автор Тема: DR500GW-HD WiFi hang with blue led on  (Прочитано 3168 раз)

0 Пользователей и 1 Гость просматривают эту тему.

Оффлайн darthmax

  • Newbie
  • Сообщений: 2
  • Вес голоса: 1
  • darthmax не имеет никакого влияния.
DR500GW-HD WiFi hang with blue led on
« : 11 Декабря 2013, 13:08:10 »
Hi folks! Anyone facing this problem? Especially when you start your car the first time of the day. I tried to disconnect the power cable and connect it back after several minutes also not helping at all. Sometimes it work after around 30 min power it off.

The camera always connected to the power magic pro for over night parking mode. I tried format the SD card using SD formatter with overwrite mode and it works again for several days then back to the square.

Fyi, I'm using the DR500 for almost 6 months. It was only lately the problem became more frequent. I did email to Blackvue support team and they replied it was the SD card problem and asked me to reformat again.

The unit already flash to FW 1.009 english.

Hope to get some answer from expert over here soon! Thanks in advance.

Реклама на сайте."Баннер 728x90"

Оффлайн grahambell

  • Newbie
  • Сообщений: 18
  • Вес голоса: 1
  • grahambell не имеет никакого влияния.
  • Город: DR500 HD
Re: DR500GW-HD WiFi hang with blue led on
« Ответ #1 : 19 Января 2014, 20:09:34 »
Hi Did you solve your problem?

Do you have conectivity via telent ?

This may help, extract from one of the update procedures of Custome firmware

#==============================================================================#
# Possible problems - when car DVR does not boot                               #
#==============================================================================#

1) Both LEDs are off – check a power source.
2) Blue light is on – at least boot loader, and possibly a core of the system
started.
3) Green light is on – car DVR operating system started at least partially;
Pittasoft software did not launch.
A reason for that may be relevant to a firmware problem, improper firmware
update, or errors of a NAND flash memory of the car DVR.
4) BOTH LEDs are ON – car DVR turned into a BRICK. In other words even boot
loader does not start.

Recovery procedures in case of situations described in p.p. 2 and 3 are
already developed by our team; fixing of the NAND flash memory and system
recovery procedures are developed too. Those procedures require a connection
of the car DVR to a PC via a UART port, and relevant technical skills.

Оффлайн darthmax

  • Newbie
  • Сообщений: 2
  • Вес голоса: 1
  • darthmax не имеет никакого влияния.
Re: DR500GW-HD WiFi hang with blue led on
« Ответ #2 : 12 Мая 2014, 13:39:10 »
Thanks a million man! Looks difficult to recover from it... Anyway, got any link to the solution? I'll try my best to get it done...

Оффлайн grahambell

  • Newbie
  • Сообщений: 18
  • Вес голоса: 1
  • grahambell не имеет никакого влияния.
  • Город: DR500 HD
Re: DR500GW-HD WiFi hang with blue led on
« Ответ #3 : 20 Мая 2014, 02:57:04 »
best of luck

 

Яндекс.Метрика
Flag Counter