ВНИМАНИЕ!!!!


Автор Тема: Issues with Custom Firmware  (Прочитано 11889 раз)

0 Пользователей и 1 Гость просматривают эту тему.

Оффлайн B20RRL

  • Newbie
  • Сообщений: 10
  • Вес голоса: 0
  • B20RRL не имеет никакого влияния.
Issues with Custom Firmware
« : 04 Июля 2013, 15:40:33 »
I have posted this over on the DashCamForum but thought I would let you guys know and perhaps you can help me work something out!

Ok so I went and did the custom firmware last night and it went swimmingly well.

Now i have come to check the footage this morning and the results aren't great!

Day Time Footage

[youtube]http://www.youtube.com/watch?v=Fd8Ia8Meg7E[/youtube]

--

Night Time Footage

[youtube]http://www.youtube.com/watch?v=F0-ExSmqvMs[/youtube]

My Config file looks like the below:

version-1.1.1a]
#==========================================================
#                  Custom config file
#==========================================================
# ------ Voice = "KOR/RUS/ENG/FR"
Voice=ENG
# ---------- Play Volume
Volume=95%
# ---------- Priority of the main processes
priority=20
#
##########################################################
#  Set LED's (ON/OFF)
##########################################################
# Wi-Fi LED in normal mode
wfled1=ON
# Wi-Fi LED in parking mode
wfled2=OFF
# GPS LED in normal mode
gpsled1=ON
# GPS LED in parking mode
gpsled2=ON
#
##########################################################
# Set G-sensor value (Low/Normal/High/ST)
##########################################################
# G-sensor in Normal mode
gNormal=ST
# G-sensor in Parking mode
gPark=ST
#
##########################################################
# Set Video parameters
##########################################################
#
# 0 =  standard avserver
# 1 =  via avserver.sh in BlackVue/Config
# 2 =  custom:  AEC/AGG with AWB TI2A
#
Video=2
Size=1080P
Bitrate=15000000
Cabac=Yes
#
###########
#  Auto White Balance (Custom/Normal)
#
# Custom  - custom AWB
# Normal - standard avserver AWB
#
AWB=Custom
#
##########
# AWB Sensor (1...3): from "warm" to "cold"
#
AWBS=2
#
#########
# Daytime Brightness (1....7)
#
AECB=3
#
########
# Auto Expositure Speed (1...4)
#
AGGS=2
#
########
# Night Brightness (1....7)
#
AGGN=3
#
########
# Video special
#
######
# Video Flip & Mirror = (ON/OFF)
#
FM=OFF
#
#
#########################################################
#  Set Wi-Fi Parameters
#########################################################
# Mode:
#
# APS - standard access point
# APC - custom access point
# DIR - direct (P2P) Mode
# STA - station mode
#
Mode=APS
#
#   DHCP Server/client (ON/OFF)
#
DHCP=ON
#-------------------------------------------------------
#
#-------------------------------------------------------
IP=192.168.8.1
MASK=255.255.255.0
GW=192.168.8.1
DNS=192.168.8.1
#-------------------------------------------------------
# MODE=DIR (Direct Mode Parameters)
#-------------------------------------------------------
# P2P mode
#
# 0 = Disable P2P
# 1 = Enable P2P
# 2 = Device will be the P2P client mode
# 3 = Device will be the P2P group owner mode (SoftAP)
#
P2P=1
#
# Mac address of the peer device
MAC=00:11:22:33:44:55
#
# P2P Client Mode
# display - peer P2P device should display its PIN CODE on screen and the user should key-in this code on local device
# keypad - local P2P device should display its PIN CODE on its screen and the user should key-in this code on peer device
# pbc - two P2P device will use the WPS push button for the following WPS procedure
# label - user should read the PIN code from the label of peer P2P device and key-in this PIN CODE on the local P2P device
#
P2PC=label

The quality on the day footage looks shockingly bad... The night time footage shows up the the purple pixels from the heat.

What changes should I make to get my decent quality footage back and stop the purple pixels? I am happy to sacrifice a lower bit-rate than 15.

I imagine if this is happening to me then it will affect others.

Thanks

Реклама на сайте."Баннер 728x90"

Оффлайн macabre

  • ǝɹqɐɔɐɯ
  • Sr. Member
  • *****
  • Сообщений: 2 708
  • Country: ru
  • Вес голоса: 28
  • macabre is awe-inspiring!macabre is awe-inspiring!macabre is awe-inspiring!macabre is awe-inspiring!macabre is awe-inspiring!macabre is awe-inspiring!macabre is awe-inspiring!macabre is awe-inspiring!macabre is awe-inspiring!macabre is awe-inspiring!macabre is awe-inspiring!macabre is awe-inspiring!
  • Пол: Мужской
  • Рожденный в СССР
  • Город: Подольск
  • Регистратор: Panorama X2
Re: Issues with Custom Firmare
« Ответ #1 : 04 Июля 2013, 15:50:24 »
hi!
try to reduce the
# Night Brightness (1....7)
#
AGGN=2 or 1
-можно ли убить человека байтом?
-да, нужно бить восемью битами.

Оффлайн B20RRL

  • Newbie
  • Сообщений: 10
  • Вес голоса: 0
  • B20RRL не имеет никакого влияния.
Re: Issues with Custom Firmare
« Ответ #2 : 04 Июля 2013, 16:34:24 »
Ok I will try that...

What about video quality during the day?

Оффлайн macabre

  • ǝɹqɐɔɐɯ
  • Sr. Member
  • *****
  • Сообщений: 2 708
  • Country: ru
  • Вес голоса: 28
  • macabre is awe-inspiring!macabre is awe-inspiring!macabre is awe-inspiring!macabre is awe-inspiring!macabre is awe-inspiring!macabre is awe-inspiring!macabre is awe-inspiring!macabre is awe-inspiring!macabre is awe-inspiring!macabre is awe-inspiring!macabre is awe-inspiring!macabre is awe-inspiring!
  • Пол: Мужской
  • Рожденный в СССР
  • Город: Подольск
  • Регистратор: Panorama X2
Re: Issues with Custom Firmare
« Ответ #3 : 04 Июля 2013, 16:51:04 »
I now can not see because the internet is very slow. look after work in the evening. ok?
-можно ли убить человека байтом?
-да, нужно бить восемью битами.

Оффлайн B20RRL

  • Newbie
  • Сообщений: 10
  • Вес голоса: 0
  • B20RRL не имеет никакого влияния.
Re: Issues with Custom Firmare
« Ответ #4 : 04 Июля 2013, 16:57:41 »
No problem...

Any help you can offer would be great.

I really like the camera and the firmware should hopefully make it better as long as we can get these issues sorted out.

Thanks,

Оффлайн GAS

  • Donated Custom
  • Full Member
  • ***
  • Сообщений: 495
  • Вес голоса: 9
  • GAS might someday be someone...GAS might someday be someone...GAS might someday be someone...GAS might someday be someone...
  • Пол: Мужской
  • Город: Кемерово
  • Регистратор: DR500GW DR550GW Panorama S
Re: Issues with Custom Firmare
« Ответ #5 : 04 Июля 2013, 21:12:35 »
B20RRL, try AWB=Normal
Руки выпрямляются с опытом.

Оффлайн B20RRL

  • Newbie
  • Сообщений: 10
  • Вес голоса: 0
  • B20RRL не имеет никакого влияния.
Re: Issues with Custom Firmare
« Ответ #6 : 04 Июля 2013, 21:49:41 »
Ok so a little update here:

I changed AGGN=2, AWB=Normal and changed the bitrate from 15mbps down to 12mbps.

Here is the output from the camera:

[youtube]http://www.youtube.com/watch?v=fPLY10kGXbI[/youtube]

I am yet to do a parked up test over night but hopefully the above settings will bring the heat down and prevent those horrible purple pixels. I will post up a new YouTube video tomorrow.

--

Another question...

+ Is there a way to remove the reflections on the windscreen via the config file?

Оффлайн sciagent

  • Administrator
  • Jr. Member
  • *****
  • Сообщений: 237
  • Country: fi
  • Вес голоса: 5
  • sciagent едва значим.sciagent едва значим.
Re: Issues with Custom Firmware
« Ответ #7 : 05 Июля 2013, 01:38:34 »
Nice video!

Ok, good, let's see your next videos 0))

As for your last question, CPL Polarizer is a solution.
http://en.wikipedia.org/wiki/Polarizing_filter_(photography)

Something like that may work:
http://www.ebay.com/itm/220845646078?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649
it just requires some workaround - that yu would be able to attach it firmly to an objective of the car DVR.

Оффлайн macabre

  • ǝɹqɐɔɐɯ
  • Sr. Member
  • *****
  • Сообщений: 2 708
  • Country: ru
  • Вес голоса: 28
  • macabre is awe-inspiring!macabre is awe-inspiring!macabre is awe-inspiring!macabre is awe-inspiring!macabre is awe-inspiring!macabre is awe-inspiring!macabre is awe-inspiring!macabre is awe-inspiring!macabre is awe-inspiring!macabre is awe-inspiring!macabre is awe-inspiring!macabre is awe-inspiring!
  • Пол: Мужской
  • Рожденный в СССР
  • Город: Подольск
  • Регистратор: Panorama X2
Re: Issues with Custom Firmware
« Ответ #8 : 05 Июля 2013, 01:47:16 »
B20RRL, I also liked the day time video  yes
-можно ли убить человека байтом?
-да, нужно бить восемью битами.

Оффлайн Dscheng

  • Newbie
  • Сообщений: 4
  • Вес голоса: 0
  • Dscheng не имеет никакого влияния.
  • Пол: Мужской
Re: Issues with Custom Firmware
« Ответ #9 : 07 Июля 2013, 04:23:43 »
Custom 111AE night time  Night time
Custom 111AE Evening time  Evening time

Hi all,

My sample video with custom setting. The night seem to be too bright. The day seem to be cold.

I think my night brightness set too high.

AWB=Custom
#
##########
# AWB Sensor (1...3): from "warm" to "cold"
#
AWBS=2
#
#########
# Daytime Brightness (1....7)
#
AECB=5
#
########
# Auto Expositure Speed (1...4)
#
AGGS=2
#
########
# Night Brightness (1....7)
#
AGGN=3




Оффлайн kwaijhie

  • Newbie
  • Сообщений: 3
  • Вес голоса: 0
  • kwaijhie не имеет никакого влияния.
Re: Issues with Custom Firmware
« Ответ #10 : 07 Июля 2013, 19:15:35 »
OK found an issue with 1.0.5eS and the new 1.1.1  I have tested this in the morning.  Events are supposed to be saved and are not to be over written when the card loops over to record over old files.  In this case 'events' they are being written over and not being saved, which is a problem if you are not able to pull the card before the event is written over.  Can we have anyone look into this.....

Оффлайн macabre

  • ǝɹqɐɔɐɯ
  • Sr. Member
  • *****
  • Сообщений: 2 708
  • Country: ru
  • Вес голоса: 28
  • macabre is awe-inspiring!macabre is awe-inspiring!macabre is awe-inspiring!macabre is awe-inspiring!macabre is awe-inspiring!macabre is awe-inspiring!macabre is awe-inspiring!macabre is awe-inspiring!macabre is awe-inspiring!macabre is awe-inspiring!macabre is awe-inspiring!macabre is awe-inspiring!
  • Пол: Мужской
  • Рожденный в СССР
  • Город: Подольск
  • Регистратор: Panorama X2
Re: Issues with Custom Firmware
« Ответ #11 : 07 Июля 2013, 23:21:08 »
*Сообщение от Dscheng [+]
The night seem to be too bright
try AGGN=1 or 2
*Сообщение от Dscheng [+]
The day seem to be cold.
reduce AWBS=1
You can also try AWB=Normal
-можно ли убить человека байтом?
-да, нужно бить восемью битами.

Оффлайн macabre

  • ǝɹqɐɔɐɯ
  • Sr. Member
  • *****
  • Сообщений: 2 708
  • Country: ru
  • Вес голоса: 28
  • macabre is awe-inspiring!macabre is awe-inspiring!macabre is awe-inspiring!macabre is awe-inspiring!macabre is awe-inspiring!macabre is awe-inspiring!macabre is awe-inspiring!macabre is awe-inspiring!macabre is awe-inspiring!macabre is awe-inspiring!macabre is awe-inspiring!macabre is awe-inspiring!
  • Пол: Мужской
  • Рожденный в СССР
  • Город: Подольск
  • Регистратор: Panorama X2
Re: Issues with Custom Firmware
« Ответ #12 : 07 Июля 2013, 23:35:05 »
kwaijhie, but this is a normal work with these settings will overwrite all files when filling sd card. take larger capacity card.
or change the settings for recording by Time
-можно ли убить человека байтом?
-да, нужно бить восемью битами.

Оффлайн kwaijhie

  • Newbie
  • Сообщений: 3
  • Вес голоса: 0
  • kwaijhie не имеет никакого влияния.
Re: Issues with Custom Firmware
« Ответ #13 : 08 Июля 2013, 04:32:34 »
This is normal?

So you are saying with the custom firmware deletes all files regardless of them being registered as an 'event'? I don't recall the stock doing that.  If that is the way the custom is designed than I think that is a significant flaw.  Based on that even if you had a large capacity card and you left your car overnight and someone hit it, because it deletes all files including 'events' you would miss out on who hit you.  Basically defeats the purpose of the BV holding onto important files especially those that may be used in court or with law enforcement to catch the person who hit your car.

*Сообщение от macabre [+]
kwaijhie, but this is a normal work with these settings will overwrite all files when filling sd card. take larger capacity card.
or change the settings for recording by Time

Оффлайн macabre

  • ǝɹqɐɔɐɯ
  • Sr. Member
  • *****
  • Сообщений: 2 708
  • Country: ru
  • Вес голоса: 28
  • macabre is awe-inspiring!macabre is awe-inspiring!macabre is awe-inspiring!macabre is awe-inspiring!macabre is awe-inspiring!macabre is awe-inspiring!macabre is awe-inspiring!macabre is awe-inspiring!macabre is awe-inspiring!macabre is awe-inspiring!macabre is awe-inspiring!macabre is awe-inspiring!
  • Пол: Мужской
  • Рожденный в СССР
  • Город: Подольск
  • Регистратор: Panorama X2
Re: Issues with Custom Firmware
« Ответ #14 : 08 Июля 2013, 09:00:29 »
kwaijhie, set recording mode by Type
-можно ли убить человека байтом?
-да, нужно бить восемью битами.

Оффлайн B20RRL

  • Newbie
  • Сообщений: 10
  • Вес голоса: 0
  • B20RRL не имеет никакого влияния.
Re: Issues with Custom Firmware
« Ответ #15 : 09 Июля 2013, 18:19:08 »
Hello everybody!

Ok so have been running the custom firmware for a few days and the daytime footage is pretty awesome at 12mbps. The camera does get pretty warm (Weather is currently 30degrees Celsius at the moment in the UK). In my Audi i just point the air con vents up towards the camera and rear view mirror and it keeps it nice and cool!

Now in the evening the footage still shows up some slight purple pixels and night time footage isn't very clear.

I am currently set on AGGN=2, should i move to AGGN=1?

Is there anything else that can be done?

-

Also if i change my camera from 1080p to 720p via the Blackvue iPhone App will it work and will it cause any problems with the custom firmware? My car is going to Audi for a service and want to record everything that happens there! :P

I will set it back to 1080p after

Оффлайн sciagent

  • Administrator
  • Jr. Member
  • *****
  • Сообщений: 237
  • Country: fi
  • Вес голоса: 5
  • sciagent едва значим.sciagent едва значим.
Re: Issues with Custom Firmware
« Ответ #16 : 10 Июля 2013, 01:08:00 »
Hello, B20RRL!

Certainly, camera is getting warm. It does that even it is off, just under a sun shining:) Sure, some heat is produced when the camera works. The harder mood is - the higher the heat. But it should not affect to camera negatively. When it does - it may be a problem with a hardware. In most cases there should not be any problems with heat as camera should work even in southern Asia.

Yes, in my cars it is also nicely cooled by the ECC, but I don't even point the air con vents to it:-)

The evening mode is still a matter to investigate. Try both, AGGN=2, and AGGN=1, and see what do you like more. Some people turn back to Video=1 mode for a night drive, some are able to find acceptable settings. Lets see how the future firmware will improve the night mode.

Increasing a bitrate to 15-16 Mbps (if your memory card allows that) may also improve a quality of video.

Please be careful when changing any settings with stock applications. They used to overwrite your custom settings in config.ini file.

Оффлайн B20RRL

  • Newbie
  • Сообщений: 10
  • Вес голоса: 0
  • B20RRL не имеет никакого влияния.
Re: Issues with Custom Firmware
« Ответ #17 : 01 Августа 2013, 13:59:14 »
Hi guys...

Following on from my post about rolling back to stock firmware (I am still running the same config settings as mentioned in a previous post)

Video 1 - Car has just been parked up and left for about 10mins.

Низкое качество | Среднее качество


--

Video 2 - Car has just been parked up for 2 hours.

Look at how bad the quality of the footage is after just 2 hours of being parked up at night.

Низкое качество | Среднее качество


--

Video 3 - This video was taken directly after the video above

Низкое качество | Среднее качество


--

Video 4 - Video from the following morning in low light conditions

Низкое качество | Среднее качество


--

Now I'm not posting the above to have a moan but more to help with getting the camera working correctly at night time... During the day it seems to be great quality.

--

Following the above videos I am now using the settings below. Is there anything else I can do?

[version-1.1.1a]
#==========================================================
#                  Custom config file
#==========================================================
# ------ Voice = "KOR/RUS/ENG/FR"
Voice=ENG
# ---------- Play Volume
Volume=95%
# ---------- Priority of the main processes
priority=20
#
##########################################################
#  Set LED's (ON/OFF)
##########################################################
# Wi-Fi LED in normal mode
wfled1=ON
# Wi-Fi LED in parking mode
wfled2=OFF
# GPS LED in normal mode
gpsled1=ON
# GPS LED in parking mode
gpsled2=ON
#
##########################################################
# Set G-sensor value (Low/Normal/High/ST)
##########################################################
# G-sensor in Normal mode
gNormal=ST
# G-sensor in Parking mode
gPark=ST
#
##########################################################
# Set Video parameters
##########################################################
#
# 0 =  standard avserver
# 1 =  via avserver.sh in BlackVue/Config
# 2 =  custom:  AEC/AGG with AWB TI2A
#
Video=2
Size=1080P
Bitrate=13000000
Cabac=Yes
#
###########
#  Auto White Balance (Custom/Normal)
#
# Custom  - custom AWB
# Normal - standard avserver AWB
#
AWB=Normal
#
##########
# AWB Sensor (1...3): from "warm" to "cold"
#
AWBS=2
#
#########
# Daytime Brightness (1....7)
#
AECB=2
#
########
# Auto Expositure Speed (1...4)
#
AGGS=2
#
########
# Night Brightness (1....7)
#
AGGN=1
#
########
# Video special
#
######
# Video Flip & Mirror = (ON/OFF)
#
FM=OFF
#
#
#########################################################
#  Set Wi-Fi Parameters
#########################################################
# Mode:
#
# APS - standard access point
# APC - custom access point
# DIR - direct (P2P) Mode
# STA - station mode
#
Mode=APS
#
#   DHCP Server/client (ON/OFF)
#
DHCP=ON
#-------------------------------------------------------
#
#-------------------------------------------------------
IP=192.168.8.1
MASK=255.255.255.0
GW=192.168.8.1
DNS=192.168.8.1
#-------------------------------------------------------
# MODE=DIR (Direct Mode Parameters)
#-------------------------------------------------------
# P2P mode
#
# 0 = Disable P2P
# 1 = Enable P2P
# 2 = Device will be the P2P client mode
# 3 = Device will be the P2P group owner mode (SoftAP)
#
P2P=1
#
# Mac address of the peer device
MAC=00:11:22:33:44:55
#
# P2P Client Mode
# display - peer P2P device should display its PIN CODE on screen and the user should key-in this code on local device
# keypad - local P2P device should display its PIN CODE on its screen and the user should key-in this code on peer device
# pbc - two P2P device will use the WPS push button for the following WPS procedure
# label - user should read the PIN code from the label of peer P2P device and key-in this PIN CODE on the local P2P device
#
P2PC=label

Оффлайн sciagent

  • Administrator
  • Jr. Member
  • *****
  • Сообщений: 237
  • Country: fi
  • Вес голоса: 5
  • sciagent едва значим.sciagent едва значим.
Re: Issues with Custom Firmware
« Ответ #18 : 10 Августа 2013, 03:20:37 »
B20RRL, thanks for your videos! My settings are similar, just bitrate is 15000000, and day brightness is 6. Night mode remains a matter of investigation.

Оффлайн JodiBB

  • Newbie
  • Сообщений: 16
  • Вес голоса: 1
  • JodiBB не имеет никакого влияния.
  • Город: CZE
Re: Issues with Custom Firmware
« Ответ #19 : 08 Октября 2013, 12:58:57 »
Hey guys,
I would like to ask for help with my DR500 video settings.
I have a big problems during sunsets and mornings when my records looks like this one:

DR500GW-custom-1.1.1aE

or this one:

DR500GW-custom-1.1.1aE


Records are too dark.

This is my settings:

# 0 =  standard avserver
# 1 =  via avserver.sh in BlackVue/Config
# 2 =  custom:  AEC/AGG with AWB TI2A
#
Video=2
Size=1080P
Bitrate=13000000
Cabac=Yes
###########
#  Auto White Balance (Custom/Normal)
#
# Custom  - custom AWB
# Normal - standard avserver AWB
AWB=Normal
# AWB Sensor (1...3): from "warm" to "cold"
AWBS=2
# Daytime Brightness (1....7)
AECB=3
# Auto Expositure Speed (1...4)
AGGS=2
# Night Brightness (1....7)
AGGN=4

Thanks ..--..

 

Яндекс.Метрика
Flag Counter