Изменения по отношению к 1-ому релизу
date: 2017-11-27
ver: SG20171127_V1.14 (Release update 1)
=====================
онлайн-переводчик:
https://translate.google.ru=====================
01. Improve - Memory card handling
02. Improve - Startup and shutdown process
03. Improve - Image quality adjustments
04. Improve - Auto calibration settings
05. Improve - AE default values
06. Improve - Reduce sharpness level
07. Add - Camera 2 menu option, normal (default) or inverted.
08. Add - Updated options for shutdown timer (for use with SGDCHW 3 wire power supply)
09. Add - Add AE Table menu options
10. Add - 5 second screensaver option
11. Add - Timelapse submenu option settings 1FPS (default), 2FPS and 5FPS (for use with SGDCHW 3 wire power supply)
12. Add - Camera restart process when camera detects memory card problem
13. Add - 5 minute option to Shutdown timer submenu (for use with SGDCHW 3 wire power supply)
14. Add - Boot delay menu options (for use with 2 wire power supply only)
15. Add - Romanian menu language
16. Bugfix - Correct the record time calculator for periods longer than 24 hours when using large cards
17. Bugfix - Correct the Russian language translations in the AE submenu
18. Bugfix - Correct setup menu name error
19. Bugfix - Timelapse switching when return to ON status (SGDCHW 3 wire power supply)
20. Bugfix - Screen saver function operation (SGDCHW 3 wire power supply)
21. Bugfix - Improve the file handling when creating a new segment in timelapse mode (SGDCHW 3 wire power supply only)
22. Bugfix - Rear camera OSD not following menu setting
23. Bugfix - Startup process when camera detects memory card problem prior to loading operating system
24. Bugfix - Resolve problem that the "5 minute" option is invalid when the timer is off. (SGDCHW 3 wire power supply only)
25. Bugfix - Update the record time calculator when switching recording modes (SGDCHW 3 wire power supply only)
26. Change - Adjust timelapse recording bitrate values (SGDCHW 3 wire power supply only)
27. Change - Remove motion detect to enable Parking Monitor function (requires SGDCHW 3 wire power supply)
28. Change - Adjust the startup delay parameters
29. Change - Adjustment to cold start process when using 2 wire power supply
30. Change - Set default date after updating to 20180101